TT-200-1-SC / TT-200-2SC Sample Concentrator

Product Description

TT-200-1-SC/ TT-200-2-SC Sample Concentrator is the all new and upgraded version of its predecessors intended to provide rapid evaporation of solvents from samples in test tubes or containers. The newly designed air chamber can be filled entirely with inert gas (nitrogen). With this technology, a uniform gas output of each stainless steel needle is guaranteed. Furthermore, any unused needle can be lifted conveniently. It works under the principle of solvent evaporation to concentrate samples. By heating the samples/solution in a dry block heater coupled with a stream of inert gas (nitrogen) direct to the surface of the sample, vapour is rapidly driven off and the sample is quickly concentrated.

The sample concentrator is built with gas manifold plate mounted onto a height adjustable stand which allows flexible positioning above the samples. There are 12 independent gas control valves that are used to control the gas flow towards the surface of each sample via gas needles. It is a compact device commonly used to replace high cost rotary evaporators and safe to be used in fume hood.

Features

  • Uniform gas output ensures entire air chamber to be filled with inert gas for improved and accurate results
  • Concentrate dozens of samples simultaneously
  • 12 independent gas control valves and optional flow regulating valve minimize wastage of nitrogen gas
  • Can be used in fume hood when concentrating toxic solvents
  • Adjustable gas needle position to suit different types of sample tubes
  • Simple installation, operation and maintenance
  • Built-in over temperature protection device, automatic fault detection system and alarm function
  • Digital display of temperature and time
  • Compact foot print, fits all standard fume hood

Application

  • Molecular biology, drug screening and analytical procedures (HPLC, GCMS), hormone assays
  • Remove solvent from DNA samples
  • Chromatographic analysis

Technical Data

SpecificationsTT-200-1-SC
Sample Concentrator
TT-200-2-SC
Sample Concentrator
Temperature control rangeR.T. +5℃ – 150℃R.T. +5℃ – 150℃
Temperature stability at 40 -100℃≤±0.5℃≤±0.5℃
Temperature stability at 100 -150℃≤±1.0℃≤±1.0℃
Block temperature uniformity at 100℃≤±0.5℃≤±0.5℃
Temperature display accuracy0.1℃0.1℃
Heating speed≤30 min (40℃to 150℃)≤30 min (40℃ to 150℃)
Digital time setting1min – 99h 59min or continuous1min – 99h 59min or continuous
Maximum vertical travel285 mm285 mm
Outer diameter of gas inletØ7 mmØ7 mm
Nitrogen pressure≤0.1MPa≤0.1MPa
Nitrogen flow rate0 – 10L/min0 – 10L/min
Needle length150 mm150 mm
Sample capacity1 standard block2 standard blocks
VoltageAC 110V / AC 220V, 50/60 HzAC 110V / AC 220V,50 / 60 Hz
Power200W400W
Dimension (W x D x H)200 x 230 x 525 mm200 x 260 x 525 mm
Net weight5.1 kg6.1 kg

Resources

Documents

Data Sheet : TT-200-1-SC / TT-200-2SC Sample Concentrator

 

Video

TT-200-1-SC/TT-200-2-SC Sample Concentrator

Ordering Info

Cat. No.Sample Concentrator
TT-200-1-SC-110VSample Concentrator TT-200-1-SC, R.T.+5-150°C, Single Block, AC 110V
TT-200-1-SC-220VSample Concentrator TT-200-1-SC, R.T.+5-150°C, Single Block, AC 220V
TT-200-2-SC-110VSample Concentrator TT-200-2-SC, R.T.+5-150°C, Dual Block, AC 110V
TT-200-2-SC-220VSample Concentrator TT-200-2-SC, R.T.+5-150°C, Dual Block, AC 220V

Optional Acessories

Cat. No.Block for Sample ConcentratorDiameter of block wellBottom shape of block wellDimension
TT-DT-01A12 x 6 mm6.5 mmRound bottom95.5 x 76.5 x 50 mm
TT-DT-02A12 x 7 mm7.5 mmRound bottom95.5 x 76.5 x 50 mm
TT-DT-03A12 x 10 mm10.5 mmRound bottom95.5 x 76.5 x 50 mm
TT-DT-04A12 x 12 mm12.5 mmRound bottom95.5 x 76.5 x 50 mm
TT-DT-05A12 x 13 mm13.5 mmRound bottom95.5 x 76.5 x 50 mm
TT-DT-06A12 x 15 mm15.5 mmRound bottom95.5 x 76.5 x 50 mm
TT-DT-07A12 x 16 mm16.5 mmRound bottom95.5 x 76.5 x 50 mm
TT-DT-08A12 x 19 mm19.5 mmRound bottom95.5 x 76.5 x 50 mm
TT-DT-09A6 x 20 mm20.5 mmRound bottom95.5 x 76.5 x 50 mm
TT-DT-10A6 x 26 mm26.5 mmRound bottom95.5 x 76.5 x 50 mm
TT-DT-11A4 x 28 mm28.5 mmFlat bottom95.5 x 76.5 x 50 mm
TT-DT-12A2 x 40 mm40.5 mmRound bottom95.5 x 76.5 x 50 mm
TT-DT-13A12 x 0.5 ml8.0 mmCone bottom95.5 x 76.5 x 50 mm
TT-DT-14A12 x 1.5 ml10.8 mmCone bottom95.5 x 76.5 x 50 mm
TT-DT-15A12 x 2.0 ml10.8 mmRound bottom95.5 x 76.5 x 50 mm
TT-DT-16A12 x 0.2 ml6.1 mmCone bottom95.5 x 76.5 x 50 mm
Cat. No.Flow Regulating Valve
TT-SC-VFlow regulating valve for Sample Concentrator