TT-200N-VSC Visible Sample Concentrator

Product Description

TT-200N-VSC Visible Sample Concentrator is intended to provide rapid evaporation of solvents
from samples in test tubes or containers. It works under the principle of solvent evaporation to
concentrate samples. By heating the samples/ solution in a dry block heater coupled with a stream
of inert gas (nitrogen) direct to the surface of the sample, vapour is rapidly driven off and the sample is
quickly concentrated. The unique design of the block enables sample level to be observed during
operation.

The sample concentrator is built with gas manifold plate mounted onto a height adjustable stand which
allows flexible positioning above the samples. There are 12 independent gas control valves that
are used to control the gas flow towards the surface of each sample via gas needles. Furthermore, any
unused needle can be lifted conveniently to avoid gas wastage. It is a compact device commonly used
to replace high cost rotary evaporators and safe to be used in fume hood.

Features

  • Concentrate dozens of samples simultaneously
  • Sample level of the concentrate can be observed during operation
  • 12 independent gas control valves and optional flow regulating valve minimize wastage of nitrogen gas
  • Can be used in fume hood when concentrating toxic solvents
  • Adjustable gas needle position to suit different types of sample tubes
  • Simple installation, operation and maintenance
  • Built-in over temperature protection device, automatic fault detection system and alarm function
  • Digital display of temperature and time
  • Compact foot print, fits all standard fume hood

Application

  • Molecular biology, drug screening and analytical procedures (HPLC, GCMS), hormone assays
  • Remove solvent from DNA samples
  • Chromatographic analysis

Technical Data

SpecificationsTT-200N-VSC Visible Sample Concentrator
Temperature control rangeR.T. +5℃ – 150℃
Temperature stability at 40 -100℃±0.5℃
Temperature stability at 100 -150℃±1.0℃
Block temperature uniformity at 100℃±0.5℃
Block temperature uniformity at 150℃±1.0℃
Temperature display accuracy0.1℃
Heating speed≤30 min (40℃ to 150℃
Digital time setting1min – 99h 59min or continuous
Maximum vertical travel285 mm
Outer diameter of gas inletØ7 mm
Nitrogen pressure≤0.1MPa
Nitrogen flow rate0 – 10L/min
Needle length150 mm
Sample capacity1 standard visible block
VoltageAC 110V/ AC 220V, 50/60 Hz
Power400W
Fuse250V, 3A/6A, Ø5x20
Dimension (W x D x H)220 x 260 x 525 mm
Net weight5.8 kg
Permissible ambient temperature5℃ – 30℃
Permissible relative humidity≤70%

Resources

Documents

Data Sheet : TT-200N-VSC Visible Sample Concentrator

Ordering Info

Cat. No.Visible Sample Concentrator
TT-200N-VSC-110VVisible Sample Concentrator TT-200N-VSC, R.T. +5-150°C, 1 Block Configured, AC 110V
TT-200N-VSC-220VVisible Sample Concentrator TT-200N-VSC, R.T. +5-150°C, 1 Block Configured, AC 220V

Optional Accessories

Cat. No.Block for Visible Sample ConcentratorDiameter of block wellBottom shape No. of block wellDimension
TT-200N-VSC-NK0112 x 10 mm10.5 mmRound bottom153.5 x 95.5 x 50 mm
TT-200N-VSC-NK0212 x 12 mm12.5 mmRound bottom153.5 x 95.5 x 50 mm
TT-200N-VSC-NK0312 x 13 mm13.5 mmRound bottom153.5 x 95.5 x 50 mm
TT-200N-VSC-NK0412 x 15 mm15.5 mmRound bottom153.5 x 95.5 x 50 mm
TT-200N-VSC-NK0512 x 16 mm16.5 mmRound bottom153.5 x 95.5 x 50 mm
TT-200N-VSC-NK0612 x 19 mm19.5 mmRound bottom153.5 x 95.5 x 50 mm
TT-200N-VSC-NK0712 x 20 mm20.5 mmRound bottom153.5 x 95.5 x 50 mm
Cat. No.Flow Regulating Valve
TT-SC-VFlow Regulating Valve for Sample Concentrator